-
MI-31802
The Kaelus MI-318 provides a flexible Smart Bias Tee solution allowing for AISG and DC to be placed onto a feeder at the bottom of the tower or extracted from the feeder at the top. Operating across 555-3800MHz the MI-318 provides the following additional benefits:
-
MI-31803
The Kaelus MI-318 provides a flexible Smart Bias Tee solution allowing for AISG and DC to be placed onto a feeder at the bottom of the tower or extracted from the feeder at the top. Operating across 555-3800MHz the MI-318 provides the following additional benefits:
-
MI-31804
The Kaelus MI-318 provides a flexible Smart Bias Tee solution allowing for AISG and DC to be placed onto a feeder at the bottom of the tower or extracted from the feeder at the top. Operating across 555-3800MHz the MI-318 provides the following additional benefits:
-
MI-32131
Kaelus world-proven outdoor solutions provide strong RF performance coupled with rugged operation. The MI-32131 enables passive loading of unused TMA input ports. This helps reduce system noise.
-
Outdoor case for 3500MHz PIM Testers
Equipped with internal shock absorbers, this outdoor case will protect your iBA-350xC from shocks up to 50G. Rated to IP54 ingress protection, the iBA350xC is well protected from the weather.
-
Outdoor case for 3500MHz PIM Testers
CA123506 – Turn your iBA-350xC into a portable PIM tester for field use! Equipped with internal shock absorbers, this outdoor case will protect your iBA-350xC from shocks up to 50G. Rated to IP54 ingress protection, the iBA350xC is well protected from the weather.
-
PDU0009F1V3-9
The PDU0009 power distribution unit has been designed to allow multiple TMAs to be fed from a single feeder and operate in a CWA mode configuration. This application is especially suited to multi-band, high current applications.
-
PIL-0005 Series
PIL-0005 Series – Low Passive Intermodulation (PIM) Load
-
PIL-0006
PIL-0006 – LOW PASSIVE INTERMODULATION (PIM) LOAD
-
Premium Accessory Kit
Premium Accessory Kit
-
R18-0749
The Extreme Weather RET assembly is an integrated design where the connector and the cable are fused into one assembly, making this solution highly resistant to moisture, contamination, and corrosion.
-
R18-0836
Rugged, Low PIM Cable Assembly.
-
R29-4382
A method to charge a battery is to use the iPA Instrument with the supplied charger adaptor.
-
R92-0443
The Dual battery charging station for the convenience of charging 2 batteries simultaneously without interrupting current ongoing testing with portable PIM analyzer.
-
R92-0459
Connector Cleaning Kit. Contains all you need to clean up the RF junctions without leaving residus and contaminants.
